The following list gives you an overview of the main innovations in
dSPACE Release 5.2.
dSPACE Release 5.2 is the last dSPACE Release to offer general
MATLAB R13 support. The only exception to this is TargetLink, the
production code generator.
AutomationDesk
1.4 | - Real-time tests programmable in Python
standard language
- Tests run synchronously to model
execution
- Support for DS1006 (single-processor
system)
- MATLAB
Access Library
- CalDesk
ECU Diagnostics Access Library
- Version control interface
|
ASM 1.2 | - New package for simulating complex gasoline engines (e.g. common-rail systems from different high-pressure pump suppliers as well as direct and manifold injection)
- ASMEngineGasolineBasic 1.2
- Was called ASM Engine Gasoline before and is now available with a new name to distinguish to the ASMEngineGasoline 2.0
- contains now a turbocharger model for boost pressure and temperature simulation
- Now equipped with system including Diesel Oxidation Catalyst (DOC) and Diesel Particulate Filter (DPF). The models for DOC and DPF support the latest Diesel ECU developments.
- ASMDriveTrainBasic 1.1
- ASMTurbocharger 1.1
- ASMEnvironment 1.0.1
- ASMVehicleDynamics 1.0.1
- ASMBrakeHydraulics 1.0.1
- ASMParameterization 1.1.1
- ASMUtils 1.2
|
CalDesk 1.4 | - Variable Editor to visualize, edit, and
create ECU description files
For more details, see Variable Editor - Instrumentation: New XY plotter and
slider instrument
- Data set manager: Improved usability
- Project and experiment navigator:
Display of ASAP2 project information
|
ConfigurationDesk
1.1.2 | - Support
of PS-DINJ 2/1 (DS1664), 2-channel direct-injection driver module
- Support
of SC-Thermo 8/1 (DS1638), 8-channel thermocouple sensor input module
(available as plug-in after dSPACE Release 5.2)
|
ControlDesk
3.0 | - CAN Navigator for RTICANMM message
configuration
- Tree view
of all RX and TX messages defined bv RTICANMM
- Easy RX
and TX layout generation
- Visualization
and switching of DBC variants
|
| dSPACE FlexRay Configuration Package 1.2 | - dSPACE FlexRay Configuration Tool 1.2
- RTI FlexRay Configuration Blockset 1.2
|
MotionDesk 2.1 | Support
of MicroAutoBox as a simulation platform |
MTest 1.4.1 | Version
control interface |
RTI Bypass
Blockset 2.2 | - Support of the CAN Calibration Protocol
(CCP) for bypassing
- Option to switch calibration pages via
XCP on CAN
- Seed & key access to ECU for XCP on
CAN and CCP
- New upload/download blocks for XCP on
CAN and CCP
- Direct interface to the dSPACE Variable
Editor
- Configurable integer conversion options
(rounding up/down)
|
RTI CAN
MultiMessage Blockset 1.4 | Handling
- Dynamic message triggering option for
each message: global enabling, spontaneous transmission (kick-out), cyclic
message activation, etc.
- New options for kick-out triggering
- Enhanced functions in the Update/Base
Time for RX and TX
Manipulation
Options
- Various manipulation options for
messages and signals, for example, checksum, parity, toggle, counter
- Enhanced options for the Gateway Mode
to switch directly from gateway signals to other sources such as a counter
- Dynamic message length (for a defined
number of TX events)
|
RTI LIN
MultiMessage Blockset 1.1 | For handling LIN setups based on LDF (LIN database
file) and DBC files
- Extension to Real-Time Interface
- Graphical configuration based on a LIN
description file
- Support of LIN 1.3 and LIN 2.0
|
RTI RPCU
Blockset 1.3 |
- Setup-block: Measurement of slave load
and overload shutdown
- Generation of angule-based signals to
trigger external systems
- Generation of trigger signal for MC PWM
to trigger ADCs
- Enhanced performance for ADC
measurement (buffer on slave), for example, for cylinder pressure measurement
- Release of SC/PS module outputs only if
I/O function is initialized
- Bit-out on TPU
|
TargetLink 2.2 | - AUTOSAR software
component modeling and code generation
- Pointer-to-struct at
function interfaces
- New Target Optimization
Modules and extended Target Simulation Module
For
more details, see TargetLink 2.2
|
MATLAB support |
- R13SP1+ (*)
- R13SP2
- R14SP3
- R2006a+ (**)
- R2006b (**)
The new TargetLink 2.2 AUTOSAR Module only supports R14SP2, R2006a+ and R2006b.
(*) TargetLink 2.2 will not support R13SP1+
(**) The RTI FlexRay Blockset of dSPACE Release 5.2 will support neither R2006a+ nor R2006b
|
